Razlika između inačica stranice Canon Pixma iP1800 Ubuntu 8.10 rješenje

Izvor: HrOpenWiki
Skoči na: orijentacija, traži
 
(Nije prikazano 10 međuinačica 3 suradnika)
Redak 3: Redak 3:
 
  </div>
 
  </div>
 
  {{Robelbox-close}}
 
  {{Robelbox-close}}
   
+
Najprije napravite fajl cupsys istovjetan fajlu cups iz shella:
 +
  sudo cp /etc/init.d/cups /etc/init.d/cupsys
 
Skinite drivere sa [http://ubuntubee.blogspot.com/2008/02/canon-pixma-ip1800-and-ubuntu.html ubuntubee.blogspot.com]   
 
Skinite drivere sa [http://ubuntubee.blogspot.com/2008/02/canon-pixma-ip1800-and-ubuntu.html ubuntubee.blogspot.com]   
 
Potom ih treba obraditi sljedećom skriptom:
 
Potom ih treba obraditi sljedećom skriptom:
  
[CODE]
 
 
  #!/bin/bash
 
  #!/bin/bash
 
 
  EDITOR=gedit
 
  EDITOR=gedit
 
 
  if [[ -z "$1" ]]; then
 
  if [[ -z "$1" ]]; then
 
   echo "Syntax: $0 debfile"
 
   echo "Syntax: $0 debfile"
 
   exit 1
 
   exit 1
 
  fi
 
  fi
 
 
  DEBFILE="$1"
 
  DEBFILE="$1"
 
  TMPDIR=`mktemp -d /tmp/deb.XXXXXXXXXX` || exit 1
 
  TMPDIR=`mktemp -d /tmp/deb.XXXXXXXXXX` || exit 1
 
  OUTPUT=`basename "$DEBFILE" .deb`.modfied.deb
 
  OUTPUT=`basename "$DEBFILE" .deb`.modfied.deb
 
 
  if [[ -e "$OUTPUT" ]]; then
 
  if [[ -e "$OUTPUT" ]]; then
 
   echo "$OUTPUT exists."
 
   echo "$OUTPUT exists."
Redak 26: Redak 22:
 
   exit 1
 
   exit 1
 
  fi
 
  fi
 
 
  dpkg-deb -x "$DEBFILE" "$TMPDIR"
 
  dpkg-deb -x "$DEBFILE" "$TMPDIR"
 
  dpkg-deb --control "$DEBFILE" "$TMPDIR"/DEBIAN
 
  dpkg-deb --control "$DEBFILE" "$TMPDIR"/DEBIAN
 
 
  if [[ ! -e "$TMPDIR"/DEBIAN/control ]]; then
 
  if [[ ! -e "$TMPDIR"/DEBIAN/control ]]; then
 
   echo DEBIAN/control not found.
 
   echo DEBIAN/control not found.
 
 
   rm -r "$TMPDIR"
 
   rm -r "$TMPDIR"
 
   exit 1
 
   exit 1
 
  fi
 
  fi
 
 
  CONTROL="$TMPDIR"/DEBIAN/control
 
  CONTROL="$TMPDIR"/DEBIAN/control
 
 
  MOD=`stat -c "%y" "$CONTROL"`
 
  MOD=`stat -c "%y" "$CONTROL"`
 
  $EDITOR "$CONTROL"
 
  $EDITOR "$CONTROL"
 
 
  if [[ "$MOD" == `stat -c "%y" "$CONTROL"` ]]; then
 
  if [[ "$MOD" == `stat -c "%y" "$CONTROL"` ]]; then
 
   echo Not modfied.
 
   echo Not modfied.
Redak 48: Redak 38:
 
   dpkg -b "$TMPDIR" "$OUTPUT"
 
   dpkg -b "$TMPDIR" "$OUTPUT"
 
  fi
 
  fi
 
 
  rm -r "$TMPDIR"
 
  rm -r "$TMPDIR"
[/CODE]
 
  
i to na način da uklonite retke koje sadrže depedencies. Dakle gornju skriptu spremite u npr. dep.sh  
+
i to na način da uklonite retke koje sadrže depedencies.  
 +
 
 +
Dakle gornju skriptu spremite u npr. dep.sh  
 +
 
 
Promijenite ju u izvršnu datoteku sa:
 
Promijenite ju u izvršnu datoteku sa:
 
  sudo chmod u+x dep.sh
 
  sudo chmod u+x dep.sh
Redak 61: Redak 52:
 
Evo caka kako ip1800 radi crno-bijelo. Otvorite ppd file /usr/share/cups/model/custom/canonip1800.ppd na dno dodajte  
 
Evo caka kako ip1800 radi crno-bijelo. Otvorite ppd file /usr/share/cups/model/custom/canonip1800.ppd na dno dodajte  
  
  OpenUI *CNQuality/Quality: PickOne
+
  *OpenUI
  DefaultCNQuality: 3
+
*CNQuality/Quality: PickOne
  CNQuality 2/High: "2"
+
  *DefaultCNQuality: 3
  CNQuality 3/Normal: "3"
+
  *CNQuality 2/High: "2"
  CNQuality 4/Standard: "4"
+
  *CNQuality 3/Normal: "3"
  CNQuality 5/Economy: "5"
+
  *CNQuality 4/Standard: "4"
  CloseUI: *CNQuality
+
  *CNQuality 5/Economy: "5"
 +
  *CloseUI: *CNQuality
  
  
Redak 73: Redak 65:
  
  
  OpenUI *CNGrayscale/Grayscale: Boolean
+
  *OpenUI  
  DefaultCNGrayscale: False
+
*CNGrayscale/Grayscale: Boolean
  CNGrayscale True/Yes: True
+
  *DefaultCNGrayscale: False
  CNGrayscale False/No: False
+
  *CNGrayscale True/Yes: True
  CloseUI: *CNGrayscale
+
  *CNGrayscale False/No: False
 +
  *CloseUI:
 +
*CNGrayscale
  
  
Redak 83: Redak 77:
  
  
  OpenUI *Resolution/Output Resolution: PickOne
+
  *OpenUI
  DefaultResolution: 600
+
*Resolution/Output Resolution: PickOne
  Resolution 600/600 dpi: "<>setpagedevice"
+
  *DefaultResolution: 600
  CloseUI: *Resolution
+
  *Resolution 600/600 dpi: "<>setpagedevice"
 +
  *CloseUI: *Resolution
  
  
Redak 92: Redak 87:
  
  
  OpenUI  
+
  *OpenUI  
  Resolution/Output Resolution: PickOne
+
  *Resolution/Output Resolution: PickOne
  DefaultResolution: 600
+
  *DefaultResolution: 600
  Resolution 300/300 dpi: "<</HWResolution[300 300]>>setpagedevice"
+
  *Resolution 300/300 dpi: "<</HWResolution[300 300]>>setpagedevice"
  Resolution 600/600 dpi: "<</HWResolution[600 600]>>setpagedevice"
+
  *Resolution 600/600 dpi: "<</HWResolution[600 600]>>setpagedevice"
  Resolution 1200/1200 dpi: "<</HWResolution[1200 1200]>>setpagedevice"
+
  *Resolution 1200/1200 dpi: "<</HWResolution[1200 1200]>>setpagedevice"
  Resolution 2400/1200 dpi: "<</HWResolution[2400 1200]>>setpagedevice"
+
  *Resolution 2400/1200 dpi: "<</HWResolution[2400 1200]>>setpagedevice"
  Resolution 4800/1200 dpi: "<</HWResolution[4800 1200]>>setpagedevice"
+
  *Resolution 4800/1200 dpi: "<</HWResolution[4800 1200]>>setpagedevice"
  CloseUI: *Resolution
+
  *CloseUI: *Resolution
  
  
te snimite file. VAŽNO: Ovaj prikaz je manjkav. Na početku svake linije treba biti zvjezdica *. Vidjeti ćete kako je ppd file pisan pa ćete lako dodati * na početak kako je to u fajlu.
+
te snimite file.  
  
 
Sad taj file treba koristiti. Preko web-preglednika uđite u CUPS sa  
 
Sad taj file treba koristiti. Preko web-preglednika uđite u CUPS sa  
Redak 119: Redak 114:
 
i nastavite dok vas ne pita ppd file. Kliknite dugme i idite do prerađenog ppd fajla i potvrdite ga.
 
i nastavite dok vas ne pita ppd file. Kliknite dugme i idite do prerađenog ppd fajla i potvrdite ga.
  
Zatim preko System-Administration-Print nađite printer desno (sekundarno) ga kliknite i birajte Properities. Tu detaljno konfigurirajte printer, a najvažnije je staviti kvačicu na checkbox "grayscale". Restartajte CUPS, ili restartajte kompjuter. Sad vam boje ispisuje u raznim sivim nijansama u što ćete se uvjeriti printanjem test stranice.
+
Zatim preko System-Administration-Print nađite printer desno (sekundarno) ga kliknite i birajte Properities. Tu detaljno konfigurirajte printer, a najvažnije je staviti kvačicu na checkbox "grayscale". Restartajte CUPS naredbom is shella kao root
 +
 
 +
sudo /etc/init.d/cupsys restart
 +
 
 +
ili restartajte kompjuter. Sad vam boje ispisuje u raznim sivim nijansama u što ćete se uvjeriti printanjem test stranice.

Trenutačna izmjena od 08:58, 13. siječnja 2009.

Rješenje za Ubuntu 8.10

Ako koristite navedeni printer i Ubuntu, sigurno imate problem instalacije printera s prelaskom na novu verziju OS-a. Evo riješenja za Intrepid Ibex i Canon Pixma IP1800.

Najprije napravite fajl cupsys istovjetan fajlu cups iz shella:

sudo cp /etc/init.d/cups /etc/init.d/cupsys

Skinite drivere sa ubuntubee.blogspot.com Potom ih treba obraditi sljedećom skriptom:

#!/bin/bash
EDITOR=gedit
if  -z "$1" ; then
  echo "Syntax: $0 debfile"
  exit 1
fi
DEBFILE="$1"
TMPDIR=`mktemp -d /tmp/deb.XXXXXXXXXX` || exit 1
OUTPUT=`basename "$DEBFILE" .deb`.modfied.deb
if  -e "$OUTPUT" ; then
  echo "$OUTPUT exists."
  rm -r "$TMPDIR"
  exit 1
fi
dpkg-deb -x "$DEBFILE" "$TMPDIR"
dpkg-deb --control "$DEBFILE" "$TMPDIR"/DEBIAN
if  ! -e "$TMPDIR"/DEBIAN/control ; then
  echo DEBIAN/control not found.
  rm -r "$TMPDIR"
  exit 1
fi
CONTROL="$TMPDIR"/DEBIAN/control
MOD=`stat -c "%y" "$CONTROL"`
$EDITOR "$CONTROL"
if  "$MOD" == `stat -c "%y" "$CONTROL"` ; then
  echo Not modfied.
else
  echo Building new deb...
  dpkg -b "$TMPDIR" "$OUTPUT"
fi
rm -r "$TMPDIR"

i to na način da uklonite retke koje sadrže depedencies.

Dakle gornju skriptu spremite u npr. dep.sh

Promijenite ju u izvršnu datoteku sa:

sudo chmod u+x dep.sh

i koristite iz terminala

sudo ./dep.sh ime_fajla.deb

Obradite oba fajla (drivera). Dobijete 2 nova pakiranja koja instalirate dvoklikom. Najprije common, pa zatim ip1800. Printer uredno radi u kolor modu!

Evo caka kako ip1800 radi crno-bijelo. Otvorite ppd file /usr/share/cups/model/custom/canonip1800.ppd na dno dodajte

*OpenUI
*CNQuality/Quality: PickOne
*DefaultCNQuality: 3
*CNQuality 2/High: "2"
*CNQuality 3/Normal: "3"
*CNQuality 4/Standard: "4"
*CNQuality 5/Economy: "5"
*CloseUI: *CNQuality


dodajte još i ovo:


*OpenUI 
*CNGrayscale/Grayscale: Boolean
*DefaultCNGrayscale: False
*CNGrayscale True/Yes: True
*CNGrayscale False/No: False
*CloseUI:
*CNGrayscale


te nađite


*OpenUI
*Resolution/Output Resolution: PickOne
*DefaultResolution: 600
*Resolution 600/600 dpi: "<>setpagedevice"
*CloseUI: *Resolution


obrišite i na to mjesto dodajte


*OpenUI 
*Resolution/Output Resolution: PickOne
*DefaultResolution: 600
*Resolution 300/300 dpi: "<</HWResolution[300 300]>>setpagedevice"
*Resolution 600/600 dpi: "<</HWResolution[600 600]>>setpagedevice"
*Resolution 1200/1200 dpi: "<</HWResolution[1200 1200]>>setpagedevice"
*Resolution 2400/1200 dpi: "<</HWResolution[2400 1200]>>setpagedevice"
*Resolution 4800/1200 dpi: "<</HWResolution[4800 1200]>>setpagedevice"
*CloseUI: *Resolution


te snimite file.

Sad taj file treba koristiti. Preko web-preglednika uđite u CUPS sa

http://localhost:631 

birajte

manage printer 

pa

modify printer 

i nastavite dok vas ne pita ppd file. Kliknite dugme i idite do prerađenog ppd fajla i potvrdite ga.

Zatim preko System-Administration-Print nađite printer desno (sekundarno) ga kliknite i birajte Properities. Tu detaljno konfigurirajte printer, a najvažnije je staviti kvačicu na checkbox "grayscale". Restartajte CUPS naredbom is shella kao root

sudo /etc/init.d/cupsys restart

ili restartajte kompjuter. Sad vam boje ispisuje u raznim sivim nijansama u što ćete se uvjeriti printanjem test stranice.